SPECIFICATIONS:

Power input:
 24 DC: 24VDC +/-10%, 0.6 amps typical, 2.2 amps internal
fusing
 AC: 100-240 VAC @ 0.25-0.15A
 AC w/24Vout: 100-240 VAC @ 2.05A
Control Output (Select Version):
Tension Precision:
Max error of 1% over temperature range. 0.1% Typical.
Enclosure: Steel, powder resin painted, NEMA 1.
Pneumatic Enclosure: Air Connections: In = 3/8” push
fitting, Out = 1/4” push fitting.
Tension Output:
All Versions:
 0 to +10VDC OR 0 to 1mA (jumper selectable).
— 0 to +10VDC max loading is 5mA. This requires a 2000
Ohm or greater input resistance for equipment connected to
this output.
 0 to +10VDC and 0 to 1mA signal capable of over-range,
-14% to 120% of full scale (-1.4VDC to 12VDC / -0.14mA to
1.2mA), to indicate over-range or error conditions.
— 0 to 1mA meter output designed for 50 Ohm impedance
meter.
Weight:
DC Panel: 1.6 lbs. (0.73 kg) DC Enclosure: 5.1 lbs. (2.31 kg)
AC Panel: 3.1 lbs. (1.41 kg) AC Enclosure: 6.6 lbs. (3.00 kg)
Pneumatic Module: 4.6 lbs. (2.09 kg)
High Voltage Output Module: 2.9 lbs. (1.32 kg)
Transducer Signal Accepted:
500 mVDC per pair at rated load (1000 mV with XR option).
Mating Transducer Cable Connectors:
(2) Amphenol ACS06AD10SL-3S-724 on enclosure
Calibration Range: 50:1 max.
Temperature Range: 32° F to 104° F (0° C to 40° C).
Zero (Tare) Range: 95% of transducer rating, minimum.
System Accuracy: within 1 - 3% typical.
Output Range: 0-100% Max.
Manual Mode Output Range: 0-100% of rated output,
0-10VDC or 4-20mA only.
Standard Tension Ranges:
See values in column below. Meter Scale
Taper Tension Range (option): 0-100%
Taper Tension by Rider Roll / Diameter Sensor:
0-10 VDC input.